Using A Frame Pattern To Make An Appliqué (2) - Brother Innov-Is NV2600 Operation Manual

Using a frame pattern to make an appliqué
(2)
This is a second method to make appliqué using embroidery
patterns. You do not have to change the fabric in the
embroidery frame using this method. Embroider one pattern
with a straight stitch and one pattern with a satin stitch.
a
Select a straight stitch frame pattern, and embroider
the pattern onto the base fabric.
b
Place the appliqué fabric over the pattern embroidered
a
in step .
• Be sure that the appliqué fabric completely covers
the stitched line.
c
Embroider the same pattern on the appliqué fabric.
d
Remove the embroidery frame from the embroidery
unit, and cut around the outside of the stitches.
Note
• Do not remove the fabric from the embroidery
frame to cut it. Also, do not pull or push on the
fabric. Otherwise, the fabric may loosen in the
frame.
e
Select the satin stitch frame pattern of the same shape
as the appliqué.
Note
• Do not change the size or position of the pattern.
• If you change the size or position of the patterns
when selecting them, make a note of the size
and location.
1 Appliqué material
f
Reattach the embroidery frame to the embroidery unit,
and embroider the satin stitch pattern to create an
appliqué.
Embroidery Applications
Embroidering E-21
E