Sewing With Free Motion Mode - Brother Innov-Is NV2600 Operation Manual

a Select a stitch.
b Press to select the pivot function.
→ The key appears as
c Place the fabric under the presser foot with the needle
at the starting point of the stitching, lower presser foot
and then press the "Start/Stop" button. The machine
will begin sewing.
Memo
• If you press the "Start/Stop" button to pause
sewing, press it again to continue, reverse
stitches (or reinforcement stitches) will not be
sewn.
d Press the "Start/Stop" button to stop the machine at
the point where the sewing direction changes.
→ The machine stops with the needle in the fabric, and
the presser foot is raised.
.
e Rotate the fabric, and then press the "Start/Stop"
button.
→ The presser foot is automatically lowered, and
sewing continues.

Sewing with free motion mode

In free motion mode, the presser foot is raised to the necessary
height for free motion sewing. When starting to sew, the
internal sensor detects the thickness of the fabric, and the
quilting foot is raised to the height specified in the machine
settings screen.
In this mode, lower the feed dogs (using the feed dog position
switch) so that the fabric can be moved freely in any direction.
CAUTION
• With free motion quilting, control the feeding
speed of the fabric to match the sewing speed.
If the fabric is moved faster than the sewing
speed, the needle may break or other damage
may result.
■ Adjusting free motion presser foot height
a Select a stitch.
b Press to display editing screen.
c Press .
→ The key appears as
d Press to display the settings screen.
Useful Functions
.
Basic operations B-45
B