BenQ IL430 Installation Handbook page 23

Checking the safe distance between displays
During video wall installation, you might want to place the displays as close to each other as
possible. Note the LCD screens may be damaged through the direct transfer of weight if an
appropriate distance is not kept between displays. The recommended gap between displays may
vary depending on your purchased models as listed below.
Model name
P Series
Actual bezel-to-bezel dimensions may exceed the listed minimum values (5.4mm for
PH460/PL460, 3.5mm for PL490/PL550/PL552/PH5501/PL4901/PL5501, 1.8 mm for
PL553/PH5502, 0.88mm for PL5502) due to different tiling methods.
You are provided with gap inspection pads to ensure appropriate space between the cascaded
displays during video wall installation.
1. Get one of the provided gap inspection
pads and fold it as illustrated.
Adhesive tape with peeling sheet
3. Stick the pad to the edge where another display will be stacked as illustrated. Each edge
should have 3 gap inspection pads attached.
Recommended gap between displays
≥ 0.5 mm
2. Remove the peeling sheet from the gap
inspection pad.
Front panel
Video wall installation guide 23