Marantz SA-12 SE Owner's Manual page 29

n Display on this unit shows nothing
Symptom
Display is off.
n No sound comes out
Symptom
No sound is produced. Or sound is
distorted.
n Sound is interrupted or noise occurs
Symptom
During playback from the CD-R/CD-RW/
DVD-R/DVD-RW/DVD+R/DVD+RW,
sound is occasionally interrupted.
During playback from the USB memory
device, sound is occasionally
interrupted.
Sound is interrupted during playback of
tracks saved on a computer.
n Desired sound does not come out
Symptom
Headphone volume is low.
Press the DISPLAY button to turn on the display.
0
Check the connections for all devices.
0
Insert connection cables all the way in.
0
Check that input connectors and output connectors are not reversely connected.
0
Check cables for damage.
0
Check the amplifier's functions and controls and adjust as necessary.
0
When connecting to a device with digital audio input connectors, set "Digital Out" to "On".
0
Digital audio output stops when playing the HD layer of a Super Audio CD or a file with a DSD signal or a linear PCM signal with a
0
sampling frequency of 352.8 kHz or higher.
If using headphones, check that "Phones" is set to "On" in the menu. Sound is not output through the headphones jack if "Off" is set.
0
The sound may skip during playback of a CD-R/CD-RW containing a high-resolution audio source.
0
This may be caused by poor recording conditions, or the disc itself may be of poor quality. Use a correctly recorded disc.
0
When the transfer speed of the USB memory device is slow, sound may occasionally be interrupted.
0
Do not start applications other than the player software while playing music on your computer.
0
The sound may be interrupted depending on the hardware or software configuration of the computer being used.
0
Switch "HP AMP Gain" to "Middle" or "High" if using headphones with high impedance or low sensitivity.
0
Cause / Solution
Cause / Solution
Cause / Solution
Cause / Solution
ENGLISH
Page
11
Page
8
－
－
－
－
12
－
24
Page
－
－
－
－
－
Page
24
28