Marantz SA-12 SE Owner's Manual page 12

ENGLISH
Playback
n Contents
Basic operation
Playing CDs/Super Audio CDs
Playing Data CDs and Data DVDs
Playing a USB memory device
Using as a D/A converter
Specifying the desired sound quality
Basic operation
X CD
DISPLAY
DISC/INPUT
DIGITAL OUT
SOUND MODE
Turning the power on
1
Press X on the main unit to turn the power on.
Press X CD on the remote control unit to turn on power
0
from standby mode.
You can also press 1 on the main unit to turn on power
0
from standby mode.
11
n When power is switched to standby
1
11
Press X CD.
13
The unit switches to standby mode, and the STANDBY
15
indicator lights red.
16
18 NOTE
Power continues to be supplied to some of the circuitry
22
0
even when the power is in the standby mode. When
leaving home for long periods of time or when going on
vacation, either press X on the main unit to turn off the
power, or unplug the power cord from the power outlet.
Selecting the playback media mode
1
Press DISC/INPUT to select the playback
media mode.
Disc
Select to playback a disc.
(Default):
Select to playback a USB memory
USB:
device.
Plays back audio files on the
USB-DAC:
computer.
Plays back the device connected
Coaxial:
to the COAXIAL connector.
Plays back the device connected
Optical:
to the OPTICAL connector.
You can also select the playback media mode by pressing
0
DISC/INPUT on the unit.
Having the display and the
illumination lamp off
The display circuit operation can be stopped to minimize
noise from the display and the display circuit which could
interfere with the analog audio output signal.
1
During playback, press DISPLAY
Each time you press DISPLAY, the display and the
illumination lamp (blue) switch on/off at the same time.
When the display is switched off, the "DISPLAY OFF"
0
indicator lights.
If you press DISPLAY at any time other than during
0
playback, the display and the illumination lamp (blue) do
not light off.
Having the illumination lamp always
off
The following procedure makes the illumination lamp always
off regardless of the display on/off operation.
1
Press and hold DISPLAY for two seconds and
longer while display is lighted.
Press and hold DISPLAY for two seconds and longer
while the lamp is always off to return to the normal
setting.