Page 2
If any parts are missing, do not begin installation until you obtain the missing parts. The ANSI/ISEA Z358.1 standard requires an uninterrupted supply of flushing fluid. Bradley plumbed emergency fixtures require a minimum of 30 PSI (0.21MPa) flowing pressure.
Page 3
3. Bottom edge of showerhead should be 84" (2134 mm) from the floor. Connect water supply 9" NOTICE! Do not rely on Bradley’s Drench Shower (229mm) to support supply piping. 1. Connect water supply piping to 1" NPT inlet on unit (piping supplied by installer). Provide...
Need help?
Do you have a question about the S19-120P and is the answer not in the manual?
Questions and answers