Technical Data; Definitions: Safety Guidelines - DeWalt DWE565 Original Instructions Manual

Eng lis h
184 mm (7-1/4") CirCular Saw, DwE561, DwE565
Congratulations!
You have chosen a D
e
experience, thorough product development and
innovation make D WALT one of the most reliable
e
partners for professional power tool users.

Technical Data

Voltage
Type
Power input
No-load speed
Blade diameter
Maximum depth of cut at
90°
45°
Blade bore
Bevel angle adjustment
Weight

Definitions: Safety Guidelines

The definitions below describe the level of severity for
each signal word. Please read the manual and pay
attention to these symbols.
DANGER: Indicates an imminently
hazardous situation which, if not avoided,
will result in death or serious injury.
WARNING: Indicates a potentially
hazardous situation which, if not
avoided, could result in death or
serious injury.
CAUTION: Indicates a potentially
hazardous situation which, if not
avoided, may result in minor or
moderate injury.
NOTICE: Indicates a practice not
related to personal injury which, if
not avoided, may result in property
damage.
Denotes risk of electric shock.
Denotes risk of fire.
6
WALT tool. Years of
DWE561 DWE565
V 220-240 220-240
1
W 1200 1250
min 5500 5500
-1
mm 184
mm 65
mm 42
mm 20
48˚
kg 3.60
General Power Tool Safety warnings
Save all warningS and inStructionS
1
The term "power tool" in the warnings refers to
your mains-operated (corded) power tool or
184 battery-operated (cordless) power tool.
1) work arEa SafETy
65
a) Keep work area clean and well lit.
Cluttered or dark areas invite accidents.
42
b) Do not operate power tools in explosive
20
atmospheres, such as in the presence of
55˚
flammable liquids, gases or dust. Power
3.70
tools create sparks which may ignite the dust
or fumes.
c) Keep children and bystanders away while
operating a power tool. Distractions can
cause you to lose control.
2) ElECTriCal SafETy
a) Power tool plugs must match the outlet.
Never modify the plug in any way. Do
not use any adapter plugs with earthed
(grounded) power tools. Unmodified plugs
and matching outlets will reduce risk of
electric shock.
b) Avoid body contact with earthed or
grounded surfaces such as pipes,
radiators, ranges and refrigerators. There
is an increased risk of electric shock if your
body is earthed or grounded.
c) Do not expose power tools to rain or wet
conditions. Water entering a power tool will
increase the risk of electric shock.
d) Do not abuse the cord. Never use the
cord for carrying, pulling or unplugging
the power tool. Keep cord away from
heat, oil, sharp edges or moving parts.
Damaged or entangled cords increase the
risk of electric shock.
e)
When operating a power tool outdoors,
use an extension cord suitable for outdoor
WARNING: To reduce the risk of injury,
read the instruction manual.
WARNING! Read all safety warnings
and all instructions. Failure to follow
the warnings and instructions may result
in electric shock, fire and/or serious
injury.
for future reference