Table of Contents
Advertisement
18V CORDLESS IMPACT WRENCH
DCF900
Congratulations!
You have chosen a D
WALT tool. Years of experience, thorough
e
product development and innovation make D
most reliable partners for professional power tool users.
Technical Data
Voltage
Type
Battery type
Power output
No load speed
Impact rate
Max tightening torque
Precision Wrench™ mode
Low Mode
Medium mode
High mode
Max breakaway torque
Weight (without battery pack)
Noise values and vibration values (triax vector sum) according to EN62841‑2‑2:
L
(emission sound pressure level)
PA
L
(sound power level)
WA
K (uncertainty for the given sound level)
Vibration emission value a
=
h
Uncertainty K =
The vibration and/or noise emission level given in this
information sheet has been measured in accordance with
a standardised test given in EN62841 and may be used to
compare one tool with another. It may be used for a preliminary
assessment of exposure.
WARNING: The declared vibration and/or noise emission
level represents the main applications of the tool. However
if the tool is used for different applications, with different
accessories or poorly maintained, the vibration and/or
noise emission may differ. This may significantly increase
the exposure level over the total working period.
An estimation of the level of exposure to vibration and/
or noise should also take into account the times when the
tool is switched off or when it is running but not actually
doing the job. This may significantly reduce the exposure
level over the total working period.
Identify additional safety measures to protect the
operator from the effects of vibration and/or noise such
as: maintain the tool and the accessories, keep the
EC‑Declaration of Conformity
WALT one of the
e
Machinery Directive
DCF900
V
18
DC
18V Cordless Impact Wrench
1
DCF900
Li‑Ion
D
e
W
760
Technical Data are in compliance with:
2006/42/EC, EN62841‑1:2015, EN62841‑2‑2:2014.
min
0–2300
‑1
These products also comply with Directive 2014/30/EU and
min
‑1
0–2200
2011/65/EU. For more information, please contact D
the following address or refer to the back of the manual.
Nm
1396
The undersigned is responsible for compilation of the technical
Nm
135
file and makes this declaration on behalf of D
Nm
813
Nm
1396
Nm
1898
Markus Rompel
kg
2.9
Vice‑President Engineering, PTE‑Europe
D
e
65510, Idstein, Germany
dB(A)
92.5
10.03.2022
dB(A)
103.5
dB(A)
3
m/s
2
15
m/s
2
1.5
D
e
"technical data" are in compliance with:
EN62841‑1:2015, EN62841‑2‑2:2014
These products conform to the following UK Regulations
The Supply of Machinery (Safety) Regulations, 2008, S.I.
2008/1597 (as amended).
Electromagnetic Compatibility Regulations, 2016, S.I.2016/1091
(as amended).
The Restriction of the Use of Certain Hazardous Substances
in Electrical and Electronic Equipment Regulations 2012, S.I.
2012/3032 (as amended).
For more information, please contact D
address or refer to the back of the manual.
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf of D
hands warm (relevant for vibration), organisation of
work patterns.
WALT declares that these products described under
WALT, Richard‑Klinger‑Straße 11,
DECLARATION OF CONFORMITY
THE SUPPLY OF MACHINERY (SAFETY)
REGULATIONS 2008
18V Cordless impact Wrench
DCF900
WALT declares that these products described under
English
WALT at
e
WALT.
e
WALT at the following
e
WALT.
e
3
Advertisement
Table of Contents
