BenQ DV2680 User Manual page 7

8. Heat sources K eep the product away
from heat sources such as radiators,
heaters, stoves and other heat-generating
products (including amplifiers).
9 . Grounding or Polarization
line plug (a plug having one blade wider than the other) or a 3-wire grounding-type plug, a
plug having a third (grounding) pin. The 2-wire polarized plug will fit into the power outlet
only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet,
try reversing the plug. If the plug still fails to fit, contact your electrician to replace your
incompatible outlet. DO NOT ATTEMPT TO BYPASS THE SAFETY PURPOSE OF THE
POLARIZ ED AND GROUNDED PLUG. The 3-wir e grounding-type plug will fit into a
grounding type power outlet. This is a safety feature. If you are unable to insert the plug into
the outlet, contact your electrician to replace your incompatible outlet.
10. Power cord protection The power cords must be routed properly to prevent people from
stepping on them or objects from resting on them. Check the cords at the plugs and
product.Power-supply cords should be routed so that they are not likely to be walked on or
snagged by items placed upon or against them. Pay particular attention to cords at doors,
plugs, receptacles, and the point where they exit from the product.
11. Attachments Do not use attachments not recommended by the manufacturer. Use of
improper attachments can result in accidents.
12. Accessories When the product is used on a trolley, care should be taken to avoid quick
stops, excessive force, and uneven surfaces that may cause the product and trolley to overturn,
damaging equipment or causing possible injury to the operator. Do not place this product on
an unstable trolley, stand, pedestal, bracket, or table. The product may fall, causing serious
injury to a child or adult and serious damage to the product. The product should be mounted
according to the manufacturer's instructions, and use only with a trolley, stand, pedestal,
bracket, or table recommended by the manufacturer.
13. Servicing Do not attempt to service the product yourself. Removing covers can expose you
to high voltage and other dangerous conditions. Request a qualified service person to
perform servicing.
14. Replacement parts In case the product needs replacement parts, make sure that the service
person uses replacement parts specified by the manufacturer, or those with the same
characteristics and performance as the original parts. Use of unauthorized parts can result in
fire, electric shock and/or other danger.
15. Power source This product is intended to be supplied by a listed power supply, output
rated 19 V DC, 3A minimum, indicated on the marking label. If you are not sure of the type
of power supply to your home, consult your product dealer or local power company. For
added protection for your TV, unplug it from the wall outlet and disconnect the cable system
when it is left unattended and unused for long periods of time. This will prevent damage due
to lightning and power line surges. When the unit has to be used with another power supply
voltage, the power cable must be changed. Consult your product dealer. The socket outlet
should be installed near the equipment and easily accessible. The power supply voltage rating
of this product's AC adaptor is AC100-240V. The power cord attached conforms to the
following power supply voltage. Use only the power cord designated by our dealer to ensure
safety and EMC. When connecting other products such as VCRs and personal computers,
you should turn off the power of the unit for protection against electric shock. If the AC
adapter is misplaced or needs to be replaced, obtain the same type of adapter from a BenQ
service center or your dealer.
This product may be equipped with either a polarized 2-wire AC
Important Safety Instructions
3