Table of Contents
Advertisement
• If water spills onto the TV or foreign objects get inside it, a short-circuit may occur which
could result in fire or electric shock. If any foreign objects get inside the TV, please consult an
Authorized Dealer.
Do not cover the ventilation holes.
• Doing so may cause the TV to overheat, which can cause fire or damage to the set.
AC Power Supply Cord
The TV is designed to operate on 100~240 V AC, 50/60 Hz. Securely insert the power cord plug
as far as it will go.
• If the plug is not fully inserted; heat may be generated which could cause fire. If the plug is
damaged or the wall socket plate is loose, they should not be used.
Do not handle the power cord plug with wet hands.
• Doing so may cause electric shocks.
Do not do anything that might damage the power cable. When disconnecting the power cable,
hold the plug, not the cable.
• Do not make any modifications, place heavy objects on, place near hot objects, heat, bend,
twist or forcefully pull the power cable. Doing so may cause damage to the power cable, which
can cause fire or electric shock. If damage to the cable is suspected, have it repaired at an
Authorized Service Center.
If the TV is not to be used for a long period of time, unplug the power cord from the wall outlet.
If problems occur during use
If a problem occurs (such as no picture or no sound), or if smoke or an abnormal odor is
detected from the TV, unplug the power cord immediately.
• Continuous use of the Display under these conditions might cause fire or permanent damage
to the unit. Have the Display evaluated at an Authorized Service Center. Services to the Display
by any unauthorized personnel are strongly discouraged due to its dangerous high voltage
nature.
If water or foreign objects get inside the TV, if the TV is dropped, or if the cabinet becomes
damaged, disconnect the power cord plug immediately.
• A short-circuit may occur, which could cause fire. Contact an Authorized Service Center for
any repairs that need to be made.
CAUTION
When using the LCD TV
To turn off the main power, be sure to remove the plug from power outlet. The power outlet
socket should be installed as near to the equipment as possible, and should be easily accessible.
Be sure to disconnect all cables before moving the LCD TV.
• Moving the Display with its cables attached might damage the cables, which, in turn, can cause
fire or electric shock.
Disconnect the power plug from the wall outlet as a safety precaution before carrying out any
cleaning.
• Electric shocks can result if this is not done.
Clean the power cable regularly to prevent it from becoming dusty.
• Built-up dust on the power cord plug can increase humidity, which might damage the
insulation and cause fire. Unplug the cord from the wall outlet and clean it with a dry cloth.
• Do not insert any objects or liquids into the unit.
• Do not expose the unit to water or moisture, or otherwise to the elements
Important Safety Instructions
7
Advertisement
Table of Contents
