Batteries; Notes On Using Batteries - BenQ DV2680 User Manual

Batteries

If the remote control does not operate, replace the batteries following the instructions below.
1. Open the lid of the remote control battery compartment
(slide the lid backward while pressing down.)
2. Insert two size-AAA batteries (included).
Ensure that the batteries are inserted with the positive and
negative terminals in the correct direction corresponding to
the (+ ) and (-) marks in the battery compartment.
3. Press down on the lid of the battery compartment and
gently push it back into position until it is firmly seated.

Notes on Using Batteries

The use of the wrong type of batteries may cause chemical leaks and/or explosion. Please note
the following:
• Always ensure that the batteries are inserted with the positive and negative terminals in the
correct direction as shown in the battery compartment.
• Different types of batteries have different characteristics. Do not mix different types.
• Do not mix old and new batteries. Mixing old and new batteries will shorten battery life and/or
cause chemical leaks from the old batteries.
• When batteries fail to function, replace them immediately.
• Chemicals which leak from batteries may cause skin irritation. If any chemical matter seeps out
of batteries, wipe it up immediately using a dry cloth.
• Due to varying storage conditions, the battery life for the batteries included with your
television may be shortened. If the remote control is not used for a long period of time, remove
the batteries.
Remote Control
21