Maintenance; Safety Considerations; Compliance To Fcc Rules - Genelec M040 Quick Setup Manual

both sides of the loudspeaker is needed. The ambient
temperature should not rise above 35 degrees Celsius
(95°F).
The reflex ports open to the underside of the enclo-
sure. This opening must not be blocked.

Maintenance

No user serviceable parts are inside the loudspeaker.
Any maintenance or repair should only be undertaken
by qualified service personnel.

Safety considerations

M030 and M040 have been designed in accordance
with international safety standards. The following
warnings and cautions must be observed to ensure
safe operation:
• Servicing and adjustment must only be
performed by qualified service personnel.
The loudspeaker must not be opened.
• Do not expose the loudspeakers to water or
moisture. Do not place any objects filled with
liquid, such as vases, on the loudspeakers or
near them.
• These loudspeakers are capable of producing
sound pressure levels in excess of 85 dB, which
may cause permanent hearing damage.
• Free flow of air behind the loudspeakers is
necessary to maintain sufficient cooling. Do not
obstruct airflow around the loudspeakers.
• Note that the amplifier is not completely
disconnected from the AC mains service unless
the mains power cord is disconnected from the
loudspeaker or the mains outlet.
Guarantee
This product is guaranteed for a period of two years
against faults in materials or workmanship. Refer to
supplier for full sales and guarantee terms.

Compliance to FCC rules

This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
This device may not cause harmful interference, and
this device must accept any interference received, in-
cluding interference that may cause undesired opera-
tion.
Note: This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against
harmful interference in a residential installation. This
equipment generates, uses and can radiate radio fre-
quency energy and, if not installed and used in ac-
cordance with the instructions, may cause harmful
interference to radio communications. However, there
is no guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television reception,
which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the
interference by one or more of the following meas-
ures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment
and receiver.
• Connect the equipment into an outlet on a
circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV
technician for help
Modifications not expressly approved by the manu-
facturer could void the user's authority to operate the
equipment under FCC rules.