Page 2
Components Please check you have all the parts listed below Body Legs Retain batch code label...
Page 3
Components -Fittings Please check you have all the fittings listed below Screw(6x50) x8 Hex key x 1 (4mm.) Felt x 4 Screw(5x50) x4 Grain stickers x 8 Hex key x1 (3mm.) Tools required IMPORTANT - PLEASE READ THESE INSTRUCTIONS FULLY BEFORE STARTING ASSEMBLY Before assembling the furniture please identify all component parts.
Page 4
Assembly instructions Step1 Using Hex-key B attach legs to the body with 8 screws. Step 2 Attach Felts under the legs.
Use place mats to protect the surface from moisture and heat. If for any reason you should have problems with your Habitat product, pleace contact the store from which you purchased it. Please retain your receipt as proof of purchase.