Page 2
Components Please check you have all the parts listed below Body Legs Retain batch code label...
Page 3
Components -Fittings Please check you have all the fittings listed below Screw x 8 Hex key x 1 (4mm.) Felt x 4 Wall strap x 1 Grain stickers x 8 Tools required IMPORTANT - PLEASE READ THESE INSTRUCTIONS FULLY BEFORE STARTING ASSEMBLY Before assembling the furniture please identify all component parts.
Page 4
Assembly instructions Step1 Using Hex-key B attach legs to the body with 8 screws. Step 2 Attach Felts under the legs.
Page 5
Assembly Instructions Step 3 a: To remove temporary handles- unscrew the ribbon. Screw and ribbon can be discared. b: Attach handles. Remove! Step 4 Step 5...
Page 6
Maintenance- To removal and adjustment the runners...
Page 7
It is recommended that the product is fitted with the anti-topple wall strap provided. Warning! The wall fixings are not supplied with this product. For fixing please seek the advice of a professional builder. Before you drill, check to ensure there are no hidden pipes or service cables in the wall.
Use place mats to protect the surface from moisture and heat. If for any reason you should have problems with your Habitat product, pleace contact the store from which you purchased it. Please retain your receipt as proof of purchase.