Page 11
ANTI-TOPPLE DEVICE HABITAT provides this anti-topple device to increase the safety in your home. It is primarily intended for furniture such as bookcases, cabinets and chests of drawers and should be mounted as shown in the following example. Please note the following: The anti-topple device is only intended to be used with the HABITAT product it accompanies.
Page 12
1 Step: Attach one supplied timber block to the back of the unit. Use 2 x G screws. 2 Step. Attach the other timber block to the wall. Use 2 x F screws. 3 Step. Push the unit to the wall so that the timber blocks are adjacent to each other.
Page 13
HANA FURNITURE Habitat's furniture is craftsman made with great care and attention to produce distinctive pieces that will bring pleasure for years to come. Each item of furniture is hand finished and uses traditional cabinet making techniques to ensure strength and longevity.
-Please follow the instructions included with your furniture if adjustment is necessary. - If doors fail to operate smoothly, or the product is moved, adjustment and levelling should be rechecked. SUNLIGHT AND HEAT - Avoid exposing your furniture to excessive heat e.g. by placing it in front of a radiator, as this can cause cracking.
- If you have relevant insurance you may wish to contact them for advice. Following the guidelines above will ensure product performance is maintained. Habitat is not responsible for defects caused by the misuse of your product. GENERAL WARNINGS Never drag furniture when moving it, always lift it.
Need help?
Do you have a question about the 206669 and is the answer not in the manual?
Questions and answers