Event Logging Procedures; About Event Logging; Viewing The Event Log - Honeywell First Alert FA168CPS User Manual

About Event Logging

About Event Logging About Event Logging About Event Logging
The system records various events in a history log, which can be viewed by the master
user using an Alpha Display keypad.
• The Event Log holds up to 100 (FA168CPS) or 50 (FA148CP) events.
• Events are displayed in chronological order, from most recent to oldest.
• When the log is full, the oldest event is replaced by the logging of any new event.

Viewing the Event Log

Viewing the Event Log
Viewing the Event Log Viewing the Event Log
1.
(Master Code)
2. The system displays the most recent event as follows:
event number, type of event (see table of codes below),
zone or user number (depending on type of event)
partition in which event occurred, time and date of
the event's occurrence.
3. Pressing [∗] displays previous events (back in time).
Pressing [#] displays events forward in time.
4. Exit by pressing any key other than [∗] or [#].
Understanding the Type of Event Displayed Understanding the Type of Event Displayed Understanding the Type of Event Displayed Understanding the Type of Event Displayed
If the event code is preceded by an E (as in the above display), it means that the
event is new and ongoing; if preceded by an R, it means the event has been restored.
See your installer for more detailed information regarding the meanings of these codes
Code - Definition
110 - Fire Alarm
121 - Duress
122 - Alarm, 24-hour Silent
123 - Alarm, 24-hour Audible
131 - Alarm, Perimeter
132 - Alarm, Interior
134 - Alarm, Entry/Exit
135 - Alarm, Day/Night
143 - Alarm, Expansion Module
145 - ECP Module cover tamper
146 - Silent Burglary
150 - Alarm, 24-Hr Aux/Mon zn
162 - Carbon Monoxide

Event Logging Procedures

Event Logging Procedures
Event Logging Procedures Event Logging Procedures
+ [#] + 6 + 0
Code - Definition
301 - AC Power
302 - Low System Battery/Batt
Test Fail
305 - System Reset (Log only)
321 - Bell/Siren Trouble
333 - Trble, Exp. Mod. Supervsn 384 - RF Sensor Low-battery
341 - Trble, ECP Cover Tamper
344 - RF Receiver Jam
351 - Telco Line Fault
353 - Long Range Radio Trble
373 - Fire Loop Trouble
374 - Exit Error Alarm
Alpha Displays:
Code - Definition
380 - Global Trouble, Trouble
Day/Night
381 - RF Supervision Trouble
382 - Supervsn Aux Wire Zone
383 - RF Sensor Tamper
393 - Clean Me
401 - Disarmed, Armed AWAY,
Armed STAY
403 - Sched. Arm/Disarm
AWAY
406 - Cancel by User
407 - Remote Arm/Disarm
408 - Quick Arm AWAY
409 - Keyswitch Arm/Disarm
AWAY
441 - Disarm/Arm/ Quick-Arm
STAY/INSTANT
DISARMED
READY TO ARM
001 E441 U001 P1
12:34AM 01/02/00
Code - Definition
442 - Keyswitch Arm/Disarm STAY
459 - Recent Closing
570 - Bypass
601 - Manual Triggered Dialer Test
602 - Periodic Test
606 - AAV to Follow
607 - Walk Test Entered/Exited
623 - Event Log 80% Full
625 - Real-Time Clock was Changed
(log only)
627 - Program Mode Entry (log
only)
628 - Program Mode Exit (log only)
642 - Latch Key (log only)
750 -789 - Configurable Zone Type
report codes
– 37 –