Using Device Commands - Honeywell First Alert FA168CPS User Manual

About Device Commands About Device Commands
About Device Commands About Device Commands
Your system may be set up so that it can control certain lights or other devices.
• Some devices may be automatically turned on or off by the system.
• You may be able to override automatically controlled devices using the
commands described below.
• Some devices can be manually turned on or off using the commands described
below.
• See your installer for a list of devices that may be set up for your system. A list
of these devices is provided at the back of this manual for you to fill out.
To Activate Devices:
(Security Code)
Devices associated with that device number activate.
To Deactivate Devices:
(Security Code)
Devices associated with that device number deactivate.

Using Device Commands

Using Device Commands
Using Device Commands Using Device Commands
+ [#] + [7] + 2-digit device number
+ [#] + [8] + 2-digit device number
Alpha Display:
DISARMED
READY TO ARM
Fixed-Word Display: READY
– 27 –