Useful Features During A Call - Panasonic KX-TG6631 Operating Instructions Manual

Digital
Hide thumbs Also See for KX-TG6631:
Table of Contents

Advertisement

Making/Answering Calls
n Programming the volume
beforehand:
1
MMENUN M#N M1N M6N M0N
2
MCN / MDN: Select the desired
volume.
3
MSAVEN A MOFFN
Temporary handset ringer off
While the handset is ringing for a call,
you can turn the ringer off temporarily by
pressing M
N.
Using the base unit
When a call is being received, the
SP-PHONE indicator flashes rapidly.
1
Press M
N when the unit rings.
2
Speak into the microphone.
3
When you finish talking, press M
Adjusting the base unit ringer volume
n KX-TG6631 series: page 3
Press M
N or M
select the desired volume.
R To turn the ringer off, press and
hold M
N until the unit beeps.
n KX-TG6641 series: page 3
Press MDN or MCN repeatedly to select
the desired volume.
R To turn the ringer off, press and
hold MCN until the unit beeps.
Note:
R Even when the ringer volume is set to
off, the base unit still rings for
intercom calls (page 48).
Useful features during
a call
Hold
This feature allows you to put an outside
call on hold.
18
For assistance, please visit http://www.panasonic.com/help
N.
N repeatedly to
Handset
1
Press MMENUN during an outside
call.
2
MCN / MDN: "Hold" A MSELECTN
3
To release hold, press M
R Another handset user can take
the call by pressing M
R The base unit user can take the
call by pressing M
Base unit
1
Proceed with the operation for your
model.
n KX-TG6631 series: page 3
PressMINTERCOMNand then pressM
Nduring an outside call.
n KX-TG6641 series:page 3
PressMHOLDNduring an outside call.
2
To release hold, press M
R A handset user can take the call
by pressing M
Note for handset and base unit:
R If a call is kept on hold for more than 9
minutes, an alarm tone starts to
sound and the ringer indicator on the
handset flashes rapidly. After 1
additional minute on hold, the call is
disconnected.
R If another phone is connected to the
same line, you can also take the call
by lifting its handset.
R While an outside call is on hold, the
SP-PHONE indicator on the base unit
flashes.
Mute
While mute is turned on, you can hear
the other party, but the other party
cannot hear you.
Handset /
1
Press MMUTEN during conversation.
R MMUTEN flashes on the handset.
N.
N.
N.
N.
N.
Base unit

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents