Table of Contents
Advertisement
VIPA HMI
4.4 Chipset
Backlight Control Select
From
Backlight On/Off Reverse
Backlight Dimming Con-
trol By
Backlight Dimming Select
Submenu "South Bridge"
HB160 | PPC | 67S-RRJ0 | en | 20-20
This section is used to configure the system based on the specific features of the chipset.
CAUTION!
Setting incorrect field values may cause the system to malfunction.
The available options are 'Pyroelectric sensor' and 'Tact Switch' . The default setting is
'Tact Switch' .
Please configure this option only when changing the panel, otherwise the display may not
work.
The options are 'Tact Switch' , 'Manual' and 'Light Sensor' . The default setting is
'Manual' and the Backlight option below will be configurable.
Adjust the brightness of the backlight.
This field is used to configure the South Bridge chipset.
BIOS setup
Chipset
49
Advertisement
Table of Contents
