Table of Contents
Advertisement
The following item appears only when you set the AI Overclocking item
to [Manual].
CPU Frequency [200]
Displays the frequency sent by the clock generator to the system bus. The
value of this item is auto-detected by the BIOS. The values range from 200
to 450.
FSB/CPU External Frequency Synchronization
Front Side Bus
DRAM Frequency [Auto]
Allows you to set the DDR2 operating frequency.
Configuration options: [Auto] [DDR2-400MHz] [DDR2-533MHz]
[DDR-667MHz]
Selecting a very high DRAM frequency may cause the system to become
unstable! If this happens, revert to the default setting.
PCI Express Frequency [Auto]
Allows you to set the PCI Express frequency. This item is set to [Auto] by
default. Configuration options: [Auto] [90]...[150]
CPU VCore Voltage [Auto]
Sets the operating VCore voltage. Configuration options: [Auto]
[1.6000V] [1.5875V] [1.5750V] [1.5625V] [1.5500V] [1.5375V]
[1.5250V] [1.5125V] [1.5000V] [1.4875V] [1.4750V] [1.4625V]
[1.4500V] [1.4375V] [1.4250V] [1.4125V] [1.4000V] [1.3875V]
[1.3750V] [1.3625V] [1.3500V] [1.3375V] [1.3250V] [1.3125V]
[1.3000V] [1.2875V]
•
•
5-20
FSB 1066
FSB 800
FSB 533
Setting to a very high CPU VCore voltage can damage the CPU or
may cause the system to become unstable. If this happens, revert
to default settings.
The configuration options may vary depending on the CPU you
installed.
CPU External Frequency
266 MHz
200 MHz
133 MHz
Chapter 5: BIOS setup
Advertisement
Table of Contents
