Table of Contents
Advertisement
2.
Copy the original or the latest motherboard BIOS file to the bootable
floppy disk.
5.1.2
ASUS EZ Flash 2 utility
The ASUS EZ Flash 2 feature allows you to update the BIOS without having
to go through the long process of booting from a floppy disk and using
a DOS-based utility. The EZ Flash 2 utility is built-in the BIOS chip so it is
accessible by pressing <Alt> + <F2> during the Power-On Self-Test (POST).
To update the BIOS using EZ Flash 2:
1.
Visit the ASUS website (www.asus.com) to download the latest BIOS
file for the motherboard.
2.
Save the BIOS file to a floppy disk or a USB flash disk, then restart the
system.
3.
You can launch the EZ Flash 2 by two methods.
(1) Insert the floppy disk / USB flash disk that contains the BIOS file
to the floppy disk drive or the USB port.
Press <Alt> + <F2> during POST to display the following.
FLASH TYPE:
BOARD:
VER:
DATE:
PATH:
A:
Note
[Enter] Select or Load
[Tab] Switch
(2) Enter BIOS setup program. Go to the Tools menu to select EZ
Flash 2 and press <Enter> to enable it.
You can switch between drives by pressing <Tab> before the
correct file is found. Then press <Enter>.
4.
When the correct BIOS file is found, EZ Flash 2 performs the BIOS
update process and automatically reboots the system when done.
•
This function can support devices such as USB flash disk, or floppy
disk with FAT 32/16/12 format only.
•
Do not shut down or reset the system while updating the BIOS to
prevent system boot failure!
ASUS V-Series P5945G
ASUSTek EZ Flash 2 BIOS ROM Utility V3.00
SST 25VF040/B
Current ROM
P5L-VM-1394
0106
07/26/06
A:\
Update ROM
BOARD:
Unknown
VER:
Unknown
DATE:
Unknown
[B] Backup
[ESC] Exit
[Up/Down/Home/End] Move
5-3
Advertisement
Table of Contents
