Table of Contents
Advertisement
2.5.2
Installing a DDR2 DIMM
Make sure to unplug the power supply before adding or removing DIMMs
or other system components. Failure to do so may cause severe damage
to both the motherboard and the components.
1.
Unlock a DDR2 DIMM socket
by pressing the retaining clips
outward.
2.
Align a DIMM on the socket
such that the notch on the
DIMM matches the break on
the socket.
A DDR2 DIMM is keyed with a notch so that it fits in only one direction.
DO NOT force a DIMM into a socket to avoid damaging the DIMM.
3.
Firmly insert the DIMM into the
socket until the retaining clips
snap back in place and the DIMM
is properly seated.
2.5.3
Removing a DDR2 DIMM
Follow these steps to remove a DIMM.
1.
Simultaneously press the
retaining clips outward to
unlock the DIMM.
Support the DIMM lightly with your fingers when pressing the retaining
clips. The DIMM might get damaged when it flips out with extra force.
2.
Remove the DIMM from the socket.
2-10
1
Unlocked retaining clip
Locked Retaining Clip
1
Chapter 2: Basic installation
DDR2 DIMM notch
3
2
DDR2 DIMM notch
2
1
1
Advertisement
Table of Contents
