Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for DNF Controls 2044CL-EVS
Summary of Contents for DNF Controls 2044CL-EVS
- Page 1 12843 Foothill Blvd., Suite D Sylmar, CA 91342 818 898 3380 voice 818 898 3360 fax www.dnfcontrols.com Model No. 2044CL-EVS (& 2044CL-EVS-T) 300 CLIP INSTANT ACCESS SYSTEM For EVS DDRs ANUAL 2044CL-EVS, 300 Clip Instant Access System, EVS DDRs...
-
Page 2: Table Of Contents
PLAY CLIP SEGMENT ADVANCED FEATURES . . . SHOTBOX SHOTKEY MAPPING TO SHOTLIST LOCATIONS SHOTBOX CONTROL SWITCHES RETURN TO LIVE VIDEO VIEW SHOTKEY ASSIGNMENTS ON THE SHOTBOX CREATE CUE POINT LABELS ON THE ST400 2044CL-EVS, 300 Clip Instant Access System, EVS DDRs... - Page 3 REFERENCE . . . SETUP MENU FUNCTION TABLE SPECIFICATIONS ST400 ST420 (SHOTBOX) TROUBLESHOOTING ST420 TROUBLESHOOTING KEY LAYOUT DNF CONTROLS LIMITED WARRANTY Manual Version......…......1.4 063005 Document ID...………....2044CL-EVS_User_Manual.doc 2044CL-EVS, 300 Clip Instant Access System, EVS DDRs...
-
Page 4: Revision History
REVISION HISTORY 100603 Rev. 1.1 Company header information revised. 111203 Rev. 1.2 Added DNF Controls Limited Warranty. 120104 Rev. 1.3 Updated ST420 Troubleshooting section. 063005 Rev. 1.4 Added Video Reference instructions. 2044CL-EVS, 300 Clip Instant Access System, EVS DDRs... -
Page 5: System Description
The 6 keys directly below the display are referred to as “Softkey.” Their function changes as indicated on the last line of the display. Shotkeys and Cue Points refer to the same memory locations. Both terms are interchangeable. 2044CL-EVS, 300 Clip Instant Access System, EVS DDRs... -
Page 6: System Installation
3) Check SETUP MENU prior to using the ST400 to confirm proper Record mode and other User settable modes. Video Reference must be connected for frame accurate playout of ganged channels, and for Capture function. Installation is complete. CONNECTION DIAGRAM 2044CL-EVS, 300 Clip Instant Access System, EVS DDRs... -
Page 7: Video Server Setup
Manually enter a Clip ID using the ST400 numeric keypad or Shotbox “QWERTY” keyboard, or PC keyboard. Press [LOAD] to load the entered CLIP ID for playout. Repeat steps a - c to load clips on desired VTRs. 2044CL-EVS, 300 Clip Instant Access System, EVS DDRs... -
Page 8: Learn A Clip Or Clip Combination
Select the desired BANK by pressing BANK [1], [2], [3], [4], [5], [6], [7], [8], [9] or [0]. Press the desired Shotkey to complete the learn process. The learned CLIP ID is displayed on the Shotkey. Press [ESC] at anytime to escape without LEARNing. 2044CL-EVS, 300 Clip Instant Access System, EVS DDRs... -
Page 9: Recall A Clip Or Clip Combination
RECUE CLIP Press [RECUE]. If an IN Point is marked (the IN indicator is on), the clip will RECUE to the IN Point. Press [CUE OUT] to cue to the marked OUT point. 2044CL-EVS, 300 Clip Instant Access System, EVS DDRs... -
Page 10: Learn From The St400
The selected Cue Point number is shown on the bottom of the display. Press [LOAD] on the ST400. The ST400 will automatically load the Learned clips on the Learned VTRs, cue the clips to the Learned IN time, then set the Learned GANG mode. 2044CL-EVS, 300 Clip Instant Access System, EVS DDRs... -
Page 11: Clear Cue Points
Press [SHIFT] +[OUT]. Manually enter the OUT time on the numeric keypad. Press [ENTER]. Press [RECUE]. The clip will cue to the IN point. Press [PLAY]. The clip will play from its current time to the OUT point, then stop. 2044CL-EVS, 300 Clip Instant Access System, EVS DDRs... -
Page 12: Advanced Features
Press [REC] key. The corresponding CAM clip will be loaded the video returns to live. Press [SHIFT] + [REC] to switch to live video. Press [SHIFT] + [REC] repeatedly to toggle between camera angles. 2044CL-EVS, 300 Clip Instant Access System, EVS DDRs... -
Page 13: View Shotkey Assignments
[ENTER] on the PC keyboard. [NEXT CUE] or [LAST CUE]. NOTE: Labels are saved in non-volatile memory in the ST400, not in the Shotbox. They are not saved in the video server. 2044CL-EVS, 300 Clip Instant Access System, EVS DDRs... -
Page 14: Reference
It is only changed by [SHIFT] + [SLOMO] (PRESET SLOMO). Press [SPD-RNG] softkey to toggle between SLOMO speed ranges: 1x OR 0 SYNC Select the appropriate softkey to enable or disable the Reference Video input. [ON] [OFF] 2044CL-EVS, 300 Clip Instant Access System, EVS DDRs... - Page 15 Clears all cue points in the selected bank. Follow the prompts on the display. CLR – CUES Clears all cue points in all banks. Follow the prompts on the display. BACK Return to prior menu item. 2044CL-EVS, 300 Clip Instant Access System, EVS DDRs...
- Page 16 [DD35] Select DD35 to allow clip functionality: Load, Recue, View available Clips. [SONY] Select SONY to control video server like a VTR. In this mode, the clip must have already been loaded. 2044CL-EVS, 300 Clip Instant Access System, EVS DDRs...
-
Page 17: Function Table
Turn the Wheel to select desired speed. Press [ESC] or any transport key to exit. STOP [STOP] Press once to STILL frame VTR. Press again to put VTR into STOP mode. 2044CL-EVS, 300 Clip Instant Access System, EVS DDRs... - Page 18 If the IN point is marked, cue to the IN point. LIVE ON Returns to Live Video on a current channel. Press the key [SHIFT] + [REC] DIFFERENT combination again to toggle between available camera angles. CAMERA ANGLES 2044CL-EVS, 300 Clip Instant Access System, EVS DDRs...
-
Page 19: Specifications
Receive B Transmit B Transmit A Transmit Common Frame Ground Spare POWER CONNECTOR 9-Pin D-Type, Female (DB9M) Pin # +5v DC +5 VDC +5v DC Ground Ground Ground +12 VDC Ground –12 VDC 2044CL-EVS, 300 Clip Instant Access System, EVS DDRs... - Page 20 GPO 5 – No function GPO 6 – No function GPO 7 – No function No Connection Ground No Connection PLAY No Connection STOP No Connection RECUE No Connection NEXT CUE Ground 2044CL-EVS, 300 Clip Instant Access System, EVS DDRs...
-
Page 21: St420 (Shotbox)
Transmit B Receive B Receive A Receive Common Frame Ground Spare POWER CONNECTOR 9-Pin D-Type, Male Pin # +5v DC No Connection +5v DC Ground Ground Ground No Connection Ground No Connection 2044CL-EVS, 300 Clip Instant Access System, EVS DDRs... -
Page 22: Troubleshooting
The ST420 displays: “ST300/400 SELECT” [ST300 V2.X] [ST300 V3.X] [ST400 V4.X – V5.20] [ST400 V5.30 and up] Press a key that corresponds to the version of the ST400 that you are using. 2044CL-EVS, 300 Clip Instant Access System, EVS DDRs... -
Page 23: Key Layout
22. KEY LAYOUT 2044CL-EVS, 300 Clip Instant Access System, EVS DDRs... -
Page 24: Dnf Controls Limited Warranty
23. DNF CONTROLS LIMITED WARRANTY DNF Controls warrants its product to be free from defects in material and workmanship for a period of one (1) year from the date of sale to the original purchaser from DNF Controls. In order to enforce the rights under this warranty, the customer must first contact DNF’s Customer Support Department to afford the opportunity of identifying and fixing the problem without sending the unit in for repair.
Need help?
Do you have a question about the 2044CL-EVS and is the answer not in the manual?
Questions and answers