Table of Contents
Advertisement
Quick Links
12843 Foothill Blvd. Suite C
Sylmar, California 91342
V: 818.898.3380
F: 818.898.3360
sales@dnfcontrols.com
Model 4000CL-L
(and 4000CL-L-T)
400 CLIP FAST ACCESS SYSTEM
Louth Protocol
V
2.1 S
ERSION
OFTWARE
NOTE: Supports up to 4 Video Server Channels
USER MANUAL
1
4000CL-L, Vs.2.1, 400 Clip Fast Access System, Louth Protocol
Advertisement
Table of Contents
Related Manuals for DNF Controls 4000CL-L
Summary of Contents for DNF Controls 4000CL-L
- Page 1 Sylmar, California 91342 V: 818.898.3380 F: 818.898.3360 sales@dnfcontrols.com Model 4000CL-L (and 4000CL-L-T) 400 CLIP FAST ACCESS SYSTEM Louth Protocol 2.1 S ERSION OFTWARE NOTE: Supports up to 4 Video Server Channels USER MANUAL 4000CL-L, Vs.2.1, 400 Clip Fast Access System, Louth Protocol...
-
Page 2: Table Of Contents
TRANSFER CUE LIST TRANSMIT CUE LIST FUNCTION RECEIVE CUE LIST FUNCTION REFERENCE . . . SETUP MENU FUNCTION TABLE SPECIFICATIONS KEY LAYOUT DNF CONTROLS LIMITED WARRANTY Manual Version..…………....…....… 1.2 012705 Document No....……..4000CL-L_Vs.2.1_User_Manual 4000CL-L, Vs.2.1, 400 Clip Fast Access System, Louth Protocol... -
Page 3: Revision History
REVISION HISTORY 022404 1.0 Original Document 080604 Rev. 1.1 Changed T-bar dimension. 012705 Rev. 1.2 Revised Key Layout. 4000CL-L, Vs.2.1, 400 Clip Fast Access System, Louth Protocol... -
Page 4: Getting Started
The ST300-S/SM is referred to as “ST300.” Words surrounded by brackets, for example, [ENTER], are keys on the ST300. [XXX + [XXX] means hold the two keys down simultaneously. XXX = Key name. 4000CL-L, Vs.2.1, 400 Clip Fast Access System, Louth Protocol... -
Page 5: System Installation
Press [ESC] to exit the MENU mode. Check SETUP MENU prior to using the ST300 to confirm proper Record mode and other User settable modes. Installation is complete. 4000CL-L, Vs.2.1, 400 Clip Fast Access System, Louth Protocol... - Page 6 SYSTEM CONNECTION DIAGRAM 4000CL-L, Vs.2.1, 400 Clip Fast Access System, Louth Protocol...
-
Page 7: Video Server Setup
Repeat steps a - d to load clips on desired VTRs. Set the GANG mode, if required. VIEW THE CLIP ID OF THE CURRENTLY LOADED CLIP Press [SHIFT] + [LOAD]. The bottom line will show the name of the loaded clip. 4000CL-L, Vs.2.1, 400 Clip Fast Access System, Louth Protocol... -
Page 8: Learn A Clip Or Clip Combination
RECUE THE CURRENTLY LOADED CLIP Press [SHIFT] + [RECUE]. Enter the desired time to search to using the ST300’s numeric keypad. Press [ENTER] to search to the entered time. Press [ESC] to exit without searching. 4000CL-L, Vs.2.1, 400 Clip Fast Access System, Louth Protocol... -
Page 9: Advanced Features
Press [LOAD] to create the selected CLIP ID. If the selected CLIP ID already exists, a warning message will be displayed. To load the existing clip, press [ENTER]. Press [ESC] to exit without loading the existing clip. 4000CL-L, Vs.2.1, 400 Clip Fast Access System, Louth Protocol... -
Page 10: Record A Clip
Set the desired record duration as described in Section 10.a., “SET THE RECORD DURATION.” Create a new name as described above in Section 10.b., “CREATE A NEW NAME.” Press [RECORD] to start recording. Press [STOP] to stop recording. 4000CL-L, Vs.2.1, 400 Clip Fast Access System, Louth Protocol... -
Page 11: Transfer Cue List
Connect the VTR4 connector on the back of the ST300 to one of the COM ports on the PC using a RS422 to RS232 adapter. Repeat steps b – g of “TO TRANSMIT CUE POINTS TO THE ST300,” Section 11.a.1). 4000CL-L, Vs.2.1, 400 Clip Fast Access System, Louth Protocol... -
Page 12: Receive Cue List Function
The RECEIVE CUE LIST function allows you to receive your list of Cue Points from a PC or from another ST300. Transfer to a PC requires OpSuite 3.0 software, which runs on a Windows-based computer. Contact DNF Controls for more information. TO RECEIVE CUE POINTS FROM THE ST300... -
Page 13: Reference
[HOLD] Fast wind is maintained only while key is depressed. [LATCH] Fast wind is initiated and maintained with momentary key press. Press the [SPD] softkey to step through the list of available wind speeds and select a speed. 4000CL-L, Vs.2.1, 400 Clip Fast Access System, Louth Protocol... - Page 14 PREROLL Enter Preroll value. Allows user to transfer Cuelist to another ST300 or a PC. TRANSMIT CUELIST RECEIVE CUELIST Allows user to receive a Cuelist from another ST300 or a PC. 4000CL-L, Vs.2.1, 400 Clip Fast Access System, Louth Protocol...
-
Page 15: Function Table
Press [ESC] or any transport key to exit. STOP [STOP] Press once to STILL frame VTR. TIME MODE [TIME MODE] Press to toggle between: SELECT Remaining time (RT) OR Elapsed time (ET). 4000CL-L, Vs.2.1, 400 Clip Fast Access System, Louth Protocol... -
Page 16: Specifications
Receive B Transmit B Transmit A Transmit Common Frame Ground Spare POWER CONNECTOR 9-Pin D-Type, Male Pin # +5v DC +5 VDC +5v DC Ground Ground Ground +12 VDC Ground –12 VDC 4000CL-L, Vs.2.1, 400 Clip Fast Access System, Louth Protocol... - Page 17 Recue GPI 4 Out GPI 4 In Next Cue GPI 5 Out GPI 5 In Last Cue GPI 6 Out GPI 6 In Recall GPI 7 Out GPI 7 In Ground 4000CL-L, Vs.2.1, 400 Clip Fast Access System, Louth Protocol...
-
Page 18: Key Layout
15. KEY LAYOUT 4000CL-L, Vs.2.1, 400 Clip Fast Access System, Louth Protocol... -
Page 19: Dnf Controls Limited Warranty
16. DNF CONTROLS LIMITED WARRANTY DNF Controls warrants its product to be free from defects in material and workmanship for a period of one (1) year from the date of sale to the original purchaser from DNF Controls. In order to enforce the rights under this warranty, the customer must first contact DNF’s Customer Support Department to afford the opportunity of identifying and fixing the problem without sending the unit in for repair.
Need help?
Do you have a question about the 4000CL-L and is the answer not in the manual?
Questions and answers