DNF Controls RPC-HOR-PESA User Manual

Horizon protocol to pesa

Advertisement

Quick Links

12843 Foothill Blvd.,
Suite D
Sylmar, CA 91342
818 898 3380 voice
818 898 3360 fax
www.dnfcontrols.com
Model No. RPC-HOR-PESA
Horizon Protocol
To
PESA
USER MANUAL
1
RPC-HOR-PESA

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the RPC-HOR-PESA and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for DNF Controls RPC-HOR-PESA

  • Page 1 12843 Foothill Blvd., Suite D Sylmar, CA 91342 818 898 3380 voice 818 898 3360 fax www.dnfcontrols.com Model No. RPC-HOR-PESA Horizon Protocol PESA USER MANUAL RPC-HOR-PESA...
  • Page 2: Table Of Contents

    FRONT PANEL REAR PANEL POWER SUPPLY CONNECTOR MASTER ROUTER RS422 SERIAL CONNECTOR SLAVE ROUTER RS232 SERIAL CONNECTOR HORIZON (MASTER ROUTER) TO RPC WIRING INTERFACE RPC TO PESA WIRING INTERFACE DNF CONTROLS LIMITED WARRANTY Manual Version ............2.4 120403 Document ID:....……RPC-HOR-PESA_User_Manual.doc RPC-HOR-PESA...
  • Page 3: Revision History

    REVISION HISTORY Rev. 2.3 063003 Reformatted. Corrected Section 3. INSTALLATION. Rev. 2.4 120403 Company header information revised. Added DNF Controls Limited Warranty. RPC-HOR-PESA...
  • Page 4: Description

    [XXX] + [XXX] means hold the two keys down simultaneously. XXX = Key name. The Horizon inputs and outputs start numbering at “0.” The PESA inputs and outputs start numbering at “1.” Horizon Levels are 0, 1, 2 and 3. RPC-HOR-PESA...
  • Page 5: Installation

    PESA Router labeled •COM 1• (see wiring information below). Communication format: 9600, N, 8, 1. Use a Null Modem Cable. Refer to wiring information at the end of the Manual. Connect power. Installation is complete. Connection Diagram RPC-HOR-PESA...
  • Page 6: Master Router - Pesa

    If the communications with the Master Router is established, then the first line of the display shows “Master: OK.” Otherwise, it shows “Master: Error.” The second line of the display shows “PESA=OK” if communication with PESA is successful. Otherwise, it shows “PESA: ERR.” RPC-HOR-PESA...
  • Page 7: Test Communication Between Master Router And Rpc

    If communication is established between the RPC and the SVS, the second line of the display shows version information for the Sierra Video Router. If there is an error, the display says “Comm. Error.” Press [ESC] to exit test mode. RPC-HOR-PESA...
  • Page 8: Specifications

    9-Pin D-Type, Male (DB9M) Pin# +5Vdc Pin# +5Vdc +5Vdc Ground Ground Ground Ground MASTER ROUTER RS422 SERIAL CONNECTOR (Device configuration) 9-Pin D-Type, Female (DB9F) Pin # Frame Ground Pin# Common Transmit A Transmit B Receive B Receive A Common Frame Ground Spare RPC-HOR-PESA...
  • Page 9: Slave Router Rs232 Serial Connector

    Frame Ground RPC TO PESA WIRING INTERFACE RPC (RS232 Controller) PESA (RS232 Device) Pin# Pin# Not Used Not Used Receive Transmit Transmit Receive Not Used Not Used Frame Ground Frame Ground Not Used Not Used Not Used Not Used RPC-HOR-PESA...
  • Page 10: 10. Dnf Controls Limited Warranty

    10. DNF CONTROLS LIMITED WARRANTY DNF Controls warrants its product to be free from defects in material and workmanship for a period of one (1) year from the date of sale to the original purchaser from DNF Controls. In order to enforce the rights under this warranty, the customer must first contact DNF’s Customer Support Department to afford the opportunity of identifying and fixing the problem without sending the unit in for repair.

Table of Contents