Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for DNF Controls 2MCE-24P
Summary of Contents for DNF Controls 2MCE-24P
- Page 1 12843 Foothill Blvd. Suite C Sylmar, California 91342 V: 818.898.3380 F: 818.898.3360 sales@dnfcontrols.com Model No. 2MCE-24P Two Machine, Cuts Only Editor With 24P Editing Capability USER MANUAL 2MCE-24P, Two Machine, Cuts Only Editor...
-
Page 2: Table Of Contents
ONE MACHINE AUDOEDIT PREVIEW FUNCTION REFERENCE . . . SETUP MENU FUNCTION TABLE SPECIFICATIONS RS422 SERIAL CONNECTOR POWER CONNECTOR GPI IN/OUT CONNECTOR KEY LAYOUT DNF CONTROLS LIMITED WARRANTY Manual Version .…...……….……….…....1.1 112103 Document ID ..….……...… MCE-24P_User_Manual.doc 2MCE-24P, Two Machine, Cuts Only Editor... -
Page 3: Revision History
REVISION HISTORY 100903 1.0 Original document. 112103 1.1 Added DNF Controls Limited Warranty. 2MCE-24P, Two Machine, Cuts Only Editor... -
Page 4: Getting Started
Getting Started . . . DESCRIPTION The 2MCE-24P is a two machine Cuts Only editor with the ability to perform 24P edits for HD media. Fast, easy to use, news-style editing. Easy to read 4-line display quickly shows in, out and duration. -
Page 5: Installation
COLOR FRAME MODE Set the color frame on the RECORD DECK to: ON Set the color frame on the PLAYBACK to: OFF Set the VTRs Capstan Lock. Set Capstan Lock on the Recorder to “2FD.” 2MCE-24P, Two Machine, Cuts Only Editor... -
Page 6: Set The Record Delay
Enter the desired Preroll Value using the numeric keypad. The display will show the entered value. Press [PREROLL] to save the current value and exit. Press [ESC] to exit without saving. Installation is complete. 2MCE-24P, Two Machine, Cuts Only Editor... - Page 7 2MCE-24P, Two Machine, Cuts Only Editor...
-
Page 8: Operation
Press [RECORD] + [PLAY] if the option in the Setup Menu is set to Rec + Play. The record VTR will begin recording immediately. There is no preroll in the Crash Record mode. The RECORD key indicator will turn on. Press [STOP] to end recording. RECORD indicator turns off. 2MCE-24P, Two Machine, Cuts Only Editor... -
Page 9: Perform An Edit
NOTE: Prior to performing an Edit, the time type of the IN and OUT are checked. If they are not both Tape Time or Time Code, an Error message is displayed and the Edit is aborted. 2MCE-24P, Two Machine, Cuts Only Editor... -
Page 10: Perform An Off Speed Edit
At the OUT time, the RECORDER will terminate record. During the Edit, turn the wheel to change the Slo-Mo speed. During the edit in INSERT mode, Press the Softkeys to punch desired channels into and out of record. 2MCE-24P, Two Machine, Cuts Only Editor... -
Page 11: Preview An Edit
The RECORDER will preroll to the original IN point, then play the edit. At the OUT point, the RECORDER will post roll 2 seconds, then stop. Press [STOP] at any time to abort Review. The REVIEW key indicator will turn off. 2MCE-24P, Two Machine, Cuts Only Editor... -
Page 12: One Machine Autoedit
The second line of the display shows “AUTO EDIT.” At the OUT point, the recorder goes out of Record and does a 2-second postroll, then goes into STOP mode. Press [STOP] at anytime to abort the autoedit. 2MCE-24P, Two Machine, Cuts Only Editor... -
Page 13: One Machine Audoedit Preview Function
At the IN point, the record ready channels will go into EE mode. The second line of the display shows “Autoedit---.” At the OUT Point, the record ready channels will go into playback mode. Press [STOP] at anytime to abort the Preview. 2MCE-24P, Two Machine, Cuts Only Editor... -
Page 14: Reference
Press [DEL] to clear the controller’s internal memory. Press [ESC] to exit without clearing memory. SET FACTORY Press [DEL] to initialize the controller to factory defaults. DEFAULTS Press [ESC] to exit without initializing controller to factory defaults. 2MCE-24P, Two Machine, Cuts Only Editor... - Page 15 MODE1 - All IN & OUT marks will use Timecode as time type regardless of the TIME MODE selection. MODE2 - The currently selected TIME MODE will be used when marking IN & OUT. RECORD DELAY Manually enter the VTR Manufacturer’s record latency in frames (0 -99). 2MCE-24P, Two Machine, Cuts Only Editor...
-
Page 16: Function Table
Press to toggle between Timecode (TC), VITC (VT) or Tape Timer SELECT (TM) display modes. TIME PRESET [SHIFT] + Press to enter Time Preset. Press [ENTER] to load Time Generator (Generator Preset) [TIME MODE] OR press [ESC] to exit without saving. 2MCE-24P, Two Machine, Cuts Only Editor... -
Page 17: Specifications
GPI 2 In GPI 3 Out GPI 3 In GPI 4 Out GPI 4 In GPI 5 Out GPI 5 In GPI 6 Out GPI 6 In GPI 7 Out GPI 7 In Ground 2MCE-24P, Two Machine, Cuts Only Editor... -
Page 18: Key Layout
KEY LAYOUT 2MCE-24P, Two Machine, Cuts Only Editor... -
Page 19: Dnf Controls Limited Warranty
DNF CONTROLS LIMITED WARRANTY DNF Controls warrants its product to be free from defects in material and workmanship for a period of one (1) year from the date of sale to the original purchaser from DNF Controls. In order to enforce the rights under this warranty, the customer must first contact DNF’s Customer Support Department to afford the opportunity of identifying and fixing the problem without sending the unit in for repair.
Need help?
Do you have a question about the 2MCE-24P and is the answer not in the manual?
Questions and answers