Download Print this page

olympia electronics GRL-38/90/M Manual page 4

Self testing non maintained emergency luminaires

Advertisement

NOTE: LED= Light Emitting Diode
LABELING EXPLANATION:
X: Self contained
0: Non Maintained (*)
A:
Including test device
F: Automatic test gear complying
with IEC 61347-2-7 denoted EL-T
90: 1.5 hour duration
180: 3 hours duration
Manufacturer
Manufacturer
Voltage Range
Nominal Power
Connections
Temperature (tc)
The light source contained in this luminaire shall only be replaced by the manufacturer, or his
agent, or a similar qualified person.
NOTE! The light source is non-user replaceable.
WARRANTY
Olympia Electronics guarantees the quality, condition and operation of the goods. The period of
warranty is specified in the official catalogue of Olympia Electronics and also in the technical leaflet,
which accompanies each product. This warranty ceases to exist if the buyer does not follow the
technical instructions included in official documents given by Olympia Electronics or if the buyer
modifies the goods provided or has any repairs or re-setting done by a third party, unless Olympia
Electronics has fully agreed to them in writing. Products that have been damaged can be returned to
the premises of our company for repair or replacement, as long as the warranty period is valid.
Olympia Electronics reserves the right to repair or to replace the returned goods and to or not charge
the buyer depending on the reason of defection. Olympia Electronics reserves the right to charge or
not the buyer the transportation cost.
HEAD OFFICE
72
km. O.N.R. Thessaloniki-Katerini
nd
P.C. 60300 P.O. Box 06 Εginio Pierias Greece
www.olympia-electronics.gr
info@olympia-electronics.gr
Page 4 from 4
(*) Non Maintained operation: The luminaire lights
its illumination source, only in power supply's
failure.
Note!! If a module
relay module), then t
the specification label, the letters B C.
LED MODULE CHARACTERISTICS
GRL-38/90/M
Olympia Electronics S.A.
CXB1512-0000-000F0HN457E COB LED CREE
Cable connection between main pcb and led module
75 °C max. across the board
will be used (except the fault
he installer should fill in
X 0 A F
9 0
GRL-38/180/M
17.2-19V
14W
, on
923038000_09_001

Advertisement

loading

This manual is also suitable for:

Grl-38/180/m