Table of Contents
Advertisement
3G/4G Module USIM Card Installation (for Models A & B)
Follow the instructions below to install the USIM card (which will be supplied by
your service provider) which requires the removal of the battery first.
1.
Turn the computer off, and turn it over.
2.
Slide the latch
in the direction of the arrow, and then slide latch
1
direction of the arrow and hold it in place.
3.
While holding the latch
the arrow
to remove the battery
4
4.
Insert the USIM card
5.
Reinsert the battery (see page
2
6
in place, pull the battery up at point
2
.
5
(see overleaf).
6
1 -
31).
3
3G/4G Module USIM Card Installation (for Models A & B) 1 - 29
in the
2
in the direction of
3
4
1
5
Quick Start Guide
Power Safety
Warning
Before you undertake any
installation
procedures,
make sure that you have
turned off the power, and
disconnected all peripher-
als and cables (including
telephone lines).
Figure 1 - 19
Battery Removal &
USIM Card Insertion
1
Advertisement
Table of Contents
