Step 2 Configure Cpu - American Megatrends Merlin DP User Manual

Step 2 Configure CPU

J16, J17, J26, and J22 select the CPU speeds and voltages for the two CPUs.
Both CPUs are configured to the same speed.
CPU Speed
If using two CPUs with different speed ratings, set the motherboard jumpers to
the lower CPU speed.
CPU Speed
150 MHz Short Pins 1 – 2
166 MHz Short Pins 1 – 2
180 MHz Short Pins 1 – 2
200 MHz Short Pins 1 – 2
Please contact American Megatrends technical
support at 770 – 246 – 8645 to support a CPU
Chapter 1 Hardware Installation
J22 J16
Open
Shorted
Open
Shorted
Important
running at a higher speed.
J17 J26
Shorted Short Pins 3 – 4
Short Pins 5 – 6
Short Pins 7 – 8
Open Short Pins3 – 4
Short Pins 5 – 6
Short Pins 7 – 8
Shorted Short Pins 1 – 2
Short Pins 5 – 6
Short Pins 7 – 8
Open Short Pins 1 – 2
Short Pins 5 – 6
Short Pins 7 – 8
Cont'd