American Megatrends Merlin DP User Manual page 12

Step 2 Configure CPU,
Install CPU
Install the CPU in the ZIF (zero insertion force) socket by performing the
following steps. The CPU socket is near one edge of the motherboard.
Improper CPU installation can damage the CPU and
the motherboard. You must follow the procedures in
this section exactly as documented. Make sure you
wear an antistatic wristband while installing the
CPU. Follow all prescribed antistatic procedures.
Step
1 Lift the lever on the ZIF socket. The empty CPU socket looks like this.
2 Check for bent pins on the CPU. Gently straighten any bent pins with
pliers. Place the CPU in the middle of the socket, as shown below. Make
sure that pin 1 of the CPU is aligned with pin 1 of the socket. Make sure
you are properly grounded while handling the CPU.
Merlin DP PCI Motherboard User's Guide
Continued
Warning
Action