American Megatrends Merlin DP User Manual page 48

Power Management Setup,
Standby Timeout
This option specifies the length of a period of system inactivity while in Full
power on state. When this length of time expires, the computer enters Standby
power state. The settings are Disabled, 1 min. (minute), 2 min, 3 min., 4 min., 5
min., 6 min, 7 min., 8 min., 9 min., 10 min., 11 min., 12 min., 13 min., 14 min, or 15
min. The Optimal and Fail – Safe default settings are Disabled.
Suspend Timeout
This option specifies the length of a period of system inactivity while in
Standby state. When this length of time expires, the computer enters Suspend
power state. The settings are Disabled, 1 min. (minute), 2 min, 3 min., 4 min., 5
min., 6 min, 7 min., 8 min., 9 min., 10 min., 11 min., 12 min., 13 min., 14 min, or 15
min. The Optimal and Fail – Safe default settings are Disabled.
Slow Clock Ratio
This option specifies the speed at which the system clock runs in power saving
states. The settings are expressed as a ratio between the normal CPU clock
speed and the CPU clock speed when the computer is in the power –
conserving state. The settings are 1:1, 1:2, 1:4, 1:8, 1:16, 1:32, 1:64, or 1:128. The
Optimal and Fail – Safe default settings are 1:8.
Merlin DP PCI Motherboard User's Guide
Continued
Cont'd