American Megatrends Merlin DP User Manual page 38

Advanced Setup,
Continued
Hit <DEL> Message Display
Set this option to Disabled to prevent
Hit <DEL> if you want to run Setup
from appearing when the system boots. The settings are Enabled or Disabled.
The Optimal and Fail – Safe default settings are Enabled.
Wait for <F1> If Error
AMIBIOS POST runs system diagnostic tests that can generate a message
followed by:
Press <F1> to continue
If this option is set to Enabled, AMIBIOS waits for an <F1> key press before
continuing. If this option is set to Disabled, AMIBIOS continues the boot
process without waiting for <F1> to be pressed. The settings are Enabled or
Disabled. The Optimal and Fail – Safe default settings are Enabled.
Pause On Configuration Screen
This option specifies the length of time that the AMIBIOS configuration screen
appears. The settings are 2 (seconds), 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, or
Disabled. The Optimal and Fail – Safe default settings are Disabled.
Boot Up Num Lock
Set this option to On to turn off the Num Lock key when the system is powered
on so you can use the arrow keys on both the numeric keypad and the
keyboard. The settings are On or Off. The Optimal default setting is Off. The
Fail – Safe default setting is On.
Password Check
This option enables password checking every time the system boots or when
you run WINBIOS Setup. If Always is chosen, a user password prompt
appears every time the computer is turned on. If Setup is chosen, the password
prompt appears if WINBIOS is executed. Instructions for changing a password.
Are provided later in this manual. The Optimal and Fail – Safe defaults are
Setup.
Merlin DP PCI Motherboard User's Guide
Cont'd