Advertisement
Quick Links
BC-SERIES
Indoor Speakers
BC3
75mm (3"), 60Wmax
BC4
100mm (4"), 70Wmax
BC5
130mm (5.25"), 90Wmax
BC6
165mm (6.5"), 120Wmax
BC8
200mm (8"), 180Wmax
Introduction
Thank you for choosing the BC-series indoor speakers. These speakers have been designed to offer high
quality sound for low impedance installations. Please read and follow the
instructions in this manual to achieve the best results and avoid damage through
misuse.
Installation
The BC-series speakers are each supplied with a wall-mounting bracket which
allows 90° lateral adjustment. When fixing to a wall or ceiling, use the bracket to
mark out the fixing points and use appropriate fixings for the substrate that the
speaker will be attached to, ensuring that the fixing is strong enough to bear the weight.
Once the bracket is fitted, support the speaker in position and attach top and bottom using the supplied
screw caps and adjust to the required angle. Further mounting points are available at the rear of the
speaker, should it be preferred to use different mounting methods (e.g. 129.130 – 129.124UK)
Note: Do not over-tighten the screw caps as this can cause the threaded inserts to fail.
White - pair
Black - pair
White - pair
Black - pair
White - pair
Black - pair
White - pair
Black - pair
White - pair
Black - pair
User Manual
100.898
100.899
100.901
100.902
100.904
100.905
100.907
100.908
100.910
100.911
Advertisement
Related Manuals for Adastra BC Series
Summary of Contents for Adastra BC Series
- Page 1 BC-SERIES User Manual Indoor Speakers White - pair 100.898 75mm (3”), 60Wmax Black - pair 100.899 White - pair 100.901 100mm (4”), 70Wmax Black - pair 100.902 White - pair 100.904 130mm (5.25”), 90Wmax Black - pair 100.905 White - pair 100.907 165mm (6.5”), 120Wmax Black - pair...
- Page 2 Connection BC-series speakers are connected via 2 spring terminals at the rear of the enclosure. With the amplifier switched off, strip the speaker wire ends and connect the “+” wire to the red terminal and connect the “-” wire to the black terminal.
- Page 3 BC-series User Manual...
- Page 4 Disposal: The “Crossed Wheelie Bin” symbol on the product means that the product is classed as Electrical or Electronic equipment and should not be disposed with other household or commercial waste at the end of its useful life. The goods must be disposed of according to your local council guidelines. Errors and omissions excepted.