Table of Contents
Advertisement
3.2 Configuring IP Address
The Managed Switch is shipped with default IP address shown below.
IP Address: 192.168.0.100
Subnet Mask: 255.255.255.0
To check the current IP address or modify a new IP address for the Switch, please
use the procedures as follows:
Show the current IP Address
1. At the "#" prompt, enter "show ip interface brief".
2. The screen displays the current IP address as shown in Figure 3-4.
Configuring IP Address
3. At the "#" prompt, enter the following command and press <Enter> as shown
in Figure 3-5.
MGS-6320-8HP2X# configure terminal
MGS-6320-8HP2X (config)# interface vlan 1
GS-5220 Series(config-if-vlan)# ip address 192.168.1.100 255.255.255.0
The previous command would apply the following settings for the Managed Switch.
IP Address: 192.168.1.100
Subnet Mask: 255.255.255.0
Figure 3-4: IP Information Screen
Figure 3-5: Configuring IP Address Screen
7
Advertisement
Table of Contents
