5. Recovering Back to Default Configuration
IP address has been changed or admin password has been
forgotten –
To reset the IP address to the default IP address "192.168.0.100" or reset the
login password to default value, press the hardware-based reset button on the
front panel for about 10 seconds. After the device is rebooted, you can log in the
management Web interface within the same subnet of 192.168.0.xx.
L3 4-Port 10/100/1000T + 4-Port 2.5G + 2-Port 10G SFP +
Managed Switch
14
R.O.
Ring
SYS
PWR
Figure 5-1: MGS-6320 Series Reset Button
1G/2.5G
10G
2
4
6
8
10
1
3
5
7
9
1G/2.5G
LNK/ACT
Reset
10/100
LNK/ACT
Reset
LNK/ACT
LNK/ACT
Console
115200,N,8,1