Advertisement
Contents
Connections
Tips
I want to play back music with a single operation from the standby state
When a input source select buttons, 1/3 button or 5 button is pressed, the operation is performed at the same time as the unit switches on.
0
I want to turn on power to this unit from a Bluetooth device
Once you perform pairing between this unit and a Bluetooth device, you can turn on power to this unit by operating the Bluetooth device. Select "Denon
0
RCD-M41" from the list of Bluetooth devices to turn on power to this unit.
I want to listen to high sound performance playback
Turning off the Bluetooth function suppresses a source of noise that affects sound quality, enabling high sound performance playback. Press and hold
0
the Bluetooth button for approximately 8 seconds. (v p. 44)
I want to adjust the tone myself
Press the SDB/TONE button to set "SDB", "BASS", "TREBLE" and "BALANCE". (v p. 48)
0
I want sound playback that is faithful to the original sound
Press the SDB/TONE button to set "S.DIRECT" to "ON". (v p. 48)
0
I want to display the clock constantly
The clock can be constantly displayed by turning the "CLOCK MODE" on. (v p. 56)
0
I want to make the volume of the headphones the same as that of the speakers
You can increase the sound from the headphones at the same volume setting by changing the "H/P AMP GAIN" settings. (v p. 55)
0
Front panel
Display
Playback
Settings
58
Rear panel
Tips
Remote
Index
Appendix
Advertisement
