Advertisement
Contents
Connections
CLOCK SETUP
Sets the current time.
1
Use ui to set the "hours".
2
Press ENTER.
The "minutes" display flashes.
3
Use ui to set the "minutes".
4
Press ENTER.
The current time is set, and the menu display disappears.
n Checking the current time when the power is on
Press CLOCK.
Press once more and the display returns to its original condition.
n Checking the current time when the power is set to
standby
Press CLOCK.
The current time is displayed for 10 seconds.
0 The time cannot be set when in the standby mode. Turn on the power first.
Front panel
Display
Playback
Settings
ALARM SETUP
Audio from the set input source can be played back at a specified time.
Audio can also be played at the same time every day.
1
Use uio p to change to desired setting, then press
ENTER to enter the setting.
A MODE SELECT
B SOURCE SELECT
53
Rear panel
Tips
Use ui to select the alarm mode, then press ENTER.
Playback starts and stops (the power
ONCE ALARM:
turns off) once only at the set times.
Playback starts and stops (the power
EVERYDAY ALARM:
turns off) at the set times each day.
Use ui to select the source, then press ENTER.
DISC / TUNER / ANALOG IN / OPTICAL IN 1 / OPTICAL IN 2 /
Bluetooth
0 If you have selected "TUNER" in "SOURCE SELECT", select the Preset
Number.
0 When no name has been registered for the selected preset number, the
frequency appears after the preset number is displayed.
0 When "Bluetooth" is selected, this unit attempts to connect to the
previously connected device.
0 The alarm may not work on some Bluetooth devices.
Remote
Index
Appendix
Advertisement
