1080p indoor/outdoor ip camera with infrared and 3x optical zoom (25 pages)
Summary of Contents for Ubiquiti UVC-G3-PRO
Page 1
Package Contents Camera Tightening Tool Screw Anchors (Qty. 2) Self-Tapping Screws (Qty. 2) Pole Mount Bracket Machine Screws (Qty. 2) Installation Requirements Pole-mounting: Two metal straps / hose clamps (not included) Create PDF in your applications with the Pdfcrowd HTML to PDF API PDFCROWD...
PoE. We recommend that you protect your networks from harmful outdoor environments and destructive ESD events with industrial-grade, shielded Ethernet cable from Ubiquiti. For more details, visit ui.com/toughcable Surge protection should be used for all outdoor installations. We recommend that you use two Ethernet Surge Protectors, model ETH-SP, one near the camera and the other at the entry point to the building.
Page 3
Create PDF in your applications with the Pdfcrowd HTML to PDF API PDFCROWD...
Ethernet Port 10/100 RJ45 port connects to an 802.3af/802.3at or 24V Passive PoE switch for PoE power and data. Reset Button To reset to factory defaults, press and hold the Reset button for more than 10 seconds while the camera is powered on. Hardware Installation Wall/Ceiling Mount Create PDF in your applications with the Pdfcrowd...
Page 5
Create PDF in your applications with the Pdfcrowd HTML to PDF API PDFCROWD...
Page 6
Create PDF in your applications with the Pdfcrowd HTML to PDF API PDFCROWD...
Page 7
Create PDF in your applications with the Pdfcrowd HTML to PDF API PDFCROWD...
Page 8
Create PDF in your applications with the Pdfcrowd HTML to PDF API PDFCROWD...
Page 9
Create PDF in your applications with the Pdfcrowd HTML to PDF API PDFCROWD...
Page 10
Create PDF in your applications with the Pdfcrowd HTML to PDF API PDFCROWD...
Page 11
Create PDF in your applications with the Pdfcrowd HTML to PDF API PDFCROWD...
Page 12
Create PDF in your applications with the Pdfcrowd HTML to PDF API PDFCROWD...
Page 13
Create PDF in your applications with the Pdfcrowd HTML to PDF API PDFCROWD...
Connecting Power The UVC G3 Pro supports 802.3af, 802.3at, and 24V Passive PoE and can be powered by any 802.3af/802.3at or 24V Passive PoE compliant switch, such as a UniFi PoE Switch. Connect the Ethernet cable from the camera directly to a PoE port on the switch. Create PDF in your applications with the Pdfcrowd HTML to PDF API PDFCROWD...
Page 19
Setting Up UniFi Protect via App Download and install the UniFi Protect app to configure the UVC-G3-PRO. Create PDF in your applications with the Pdfcrowd HTML to PDF API PDFCROWD...
Page 20
Launch the UniFi Protect app and follow the on-screen instructions to complete setup. UniFi Video App Note: For UniFi Video 3 deployments, there is a UniFi Video mobile app available for download in the App Store® for iOS devices and Google Play™...
Page 21
Create PDF in your applications with the Pdfcrowd HTML to PDF API PDFCROWD...
Page 22
Create PDF in your applications with the Pdfcrowd HTML to PDF API PDFCROWD...
Page 23
Create PDF in your applications with the Pdfcrowd HTML to PDF API PDFCROWD...
Specifications UVC-G3-PRO Dimensions Ø 86 x 153 mm (Ø 3.39 x 6.02") (Without Mounting Plate) Weight 700 g (1.54 lb) (Without Mounting Plate) Enclosure UV Stabilized Polycarbonate and Die-Cast Aluminum Networking Interface (1) 10/100 Ethernet Port Sensor Sony IMX290, 1/2.8"...
Page 25
UVC-G3-PRO Wide 108° (H), 58° (V), 125° (D) Tele 37° (H), 20° (V), 43° (D) Night Mode IR LEDs with Mechanical IR Cut Filter Video Compression H.264 Resolution 1080p Full HD (1920 x 1080) Maximum Frame Rate 30 FPS Image Settings...
Safety Notices 1. Read, follow, and keep these instructions. 2. Heed all warnings. 3. Only use attachments/accessories specified by the manufacturer. WARNING: Hot surface. Do not touch. WARNING: Do not use this product in location that can be submerged by water. WARNING: Avoid using this product during an electrical storm.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions. 1. This device may not cause harmful interference, and 2.