Gigabyte H252-3C0 User Manual page 81

Parameter
Memory Topology
Memory RAS Configuration
BIOS Setup
Description
Press [Enter] to view memory topology with DIMM population
information.
Press [Enter] to configure advanced items.
RAS Type
Š
– Displays the RAS type.
New SDDC Mode
Š
– Enable 48B SDDC ECC from ICX C0 Onwards.
– Options available: Disabled/Enabled. Default setting is Enabled.
Mirror Mode
Š
– Full Mirror Mode will set entire 1LM memory in system to be
mirrored, consequently reducing the memory capacity by half.
Partial Mirror Mode will enable the required size of memory to
be mirrored. If rank sparing is enabled partial mirroring will not
take effect.
– Options available: Disabled/ Full Mirror Mode/Partial Mirror
Mode. Default setting is Disabled.
Correctable Error Threshold
Š
– Correctable Error Threshold (1-32767) used for sparing, tagging,
and leaky bucket.
– Press the <+> / <-> keys to increase or decrease the desired
values.
Trigger SW Error Threshold
Š
– Enable/Disable Sparing trigger SW Error Match Threshold..
– Options available: Disabled/ Full Mirror Mode/Partial Mirror
Mode. Default setting is Disabled.
Sparing SW Error Match Threshold
Š
– Press the <+> / <-> keys to increase or decrease the desired
values.
Correctable Error Time Window.
Š
– Press the <+> / <-> keys to increase or decrease the desired
values.
Leaky bucket time window based ini.
Š
– Press the <+> / <-> keys to increase or decrease the desired
values.
Leaky bucket low bit
Š
– Press the <+> / <-> keys to increase or decrease the desired
values.
Leaky bucket high bit
Š
– Press the <+> / <-> keys to increase or decrease the desired
values.
ADDDC Sparing
Š
– Default setting is Disabled.
Column Correction Disable
Š
– Default setting is Disable.
- 81 -