Common Refcode Configuration - Gigabyte H252-3C0 User Manual

5-3-2 Common RefCode Configuration

Parameter
Common RefCode Configuration
MMIO High Base
MMIO High Granularity Size
Isoc Mode
Numa (Non-Uniform Memory
Access)
Virtual Numa
Description
Selects the MMIO High Base setting.
Options available: 56T, 40T, 32T, 24T, 16T, 4T, 1T/512G/3584T.
Default setting is 4T.
Selects the allocation size used to assign mmioh resources.
Total mmioh space can be up to 32xgranularity. Per stack mmioh
resource assignments are multiples of the granularity where 1 unit
per stack is the default allocation.
Options available: 1G, 4G, 16G, 64G, 256G, 1024G. Default setting
is 1024G.
Enable/Disable the Isochronous support in order to meet the QoS
requirements (Quality of Service).
Options available: Auto, Enable, Disable. Default setting is Disable.
Enable/Disable Non-uniform Memory Access (NUMA) support to
improve the system performance.
Options available: Enable/Disable. Default setting is Enable.
Divide physical NUMA nodes into evenly sized virtual NUMA nodes
in ACPI table. This may improve Windows performance on CPUs
with more than 64 logical processors.
Options available: Enable/Disable. Default setting is Enable.
- 77 - BIOS Setup