Gigabyte H252-3C0 User Manual page 80

Parameter
Legacy ADR Mode
Minimum System Memory Size
ADR Data Save Mode
Erase-ARM NVDIMMs
Restore NVDIMMs
Interleave NVDIMMs
Assert ADR on Reset
Assert ADR on S5
Get Memory Timing
Description
Enable/Disable the Legacy ADR Mode.
Options available: Enable/Disable. Default setting is Disable.
Minimum system memory size assigned as system memory when
only JEDEC NVDIMMs are present.
Options available: 2GB, 4GB, 6GB, 8GB.
Default setting is 8GB.
Specifies the Data Save Mode for ADR. Batterybacked or Type 01
NVDIMM.
Options available: Disable, Batterybacked DIMMs, NVDIMMs.
Default setting is NVDIMMs.
Enable/Disable Erasing and Arming NVDIMMs.
Options available: Enable/Disable. Default setting is Enable.
Enable/Disable Automatic restoring of NVDIMMs.
Options available: Enable/Disable. Default setting is Enable.
Controls if NVDIMMs are interleaved together or not.
Options available: Enable/Disable. Default setting is Enable.
Enable/Disable Assert ADR on Reset.
Options available: Enable/Disable. Default setting is Disable.
Enable/Disable Assert ADR on S5.
Options available: Enable/Disable. Default setting is Disable.
Options available: Enabled/Disabled. Default setting is Disabled.
- 80 - BIOS Setup