5-3-3 UPI Configuration
Parameter
UPI Configuration
Uncore General Configuration
BIOS Setup
Description
Press [Enter] to configure advanced items.
Uncore Status
– Press [Enter] to view the UPI status.
Link Frequency Select
– Selects the UPI link frequency.
– Options available: 9.6GB/s, 10.4GB/s, Auto. Default setting is Auto.
SNC (Sub NUMA)
– Enable/Disable Sub NUMA Cluster function.
– Options available: Disable, Enable SNC2 (2-clusters). Default setting
is Disable.
Stale AtoS
– Enable/Disable Stale A to S directory optimization.
– Options available: Disable, Enable, Auto. Default setting is Auto.
LLC dead line alloc
– Enable/Disable fill dead lines in LLC.
– Options available: Disable, Enable, Auto. Default setting is Enable.
- 78 -