Processor Configuration - Gigabyte H252-3C0 User Manual

Parameter

Processor Configuration

Pre-Socket Configuration
Processor Socket / Processor ID /
Processor Frequency / Processor
Max Ratio / Processor Min Ratio
/ Microcode Revision / L1 Cache
RAM / L2 Cache RAM / L3 Cache
RAM / Processor Version
Hyper-Threading [All]
Hardware Prefetcher
L2 RF0 Prefetch Disable
Adjacent Cache Prefetch
DCU Streamer Prefetcher
DCU IP Prefetcher
Extended APIC
Enable Intel(R) TXT
Description
Press [Enter] to configure advanced items.
CPU Socket 0 Configuration
Š
– Press [Enter] to configure advanced items.
Core Disable Bitmap(Hex)
Š
– Number of Cores to enable. 0 means all cores. FFFFFFF
means to disable all cores. The maximum value depends on the
number of CPUs available. Press the numeric keys to adjust
desired values.
Displays the technical specifications for the installed processor(s).
The Hyper Threading Technology allows a single processor to execute
two or more separate threads concurrently. When hyper-threading is
enabled, multi-threaded software applications can execute their threads,
thereby improving performance.
Options available: Enable/Disable. Default setting is Enable.
Select whether to enable the speculative prefetch unit of the processor.
Options available: Enable/Disable. Default setting is Disable.
Options available: Enable/Disable. Default setting is Disable.
When enabled, cache lines are fetched in pairs. When disabled, only
the required cache line is fetched.
Options available: Enable/Disable. Default setting is Enable.
Prefetches the next L1 data line based upon multiple loads in same
cache line.
Options available: Enable/Disable. Default setting is Enable.
Prefetches the next L1 Data line based upon sequential load history.
Options available: Enable/Disable. Default setting is Enable.
Enable/Disable extended APIC support. Note: This will enabled VT-d
automatically if x2APIC is enabled.
Options available: Enable/Disable. Default setting is Disable.
Enable/Disable the Intel Trusted Execution Technology support function.
Options available: Enable/Disable. Default setting is Disable.
- 75 - BIOS Setup