OPERATOR'S MANUAL
MANUEL D'UTILISATION
MANUAL DEL OPERADOR
ELECTRIC PRESSURE WASHER
LAVEUSE À PRESSION À ÉLECTRIQUE
LAVADORA DE PRESIÓN A ELÉCTRICA
RY141612/RY141612VN/
RY141612VNM
TABLE OF CONTENTS
Symbols ...........................................5-6
Features ..............................................8
Assembly .........................................8-9
Parts Ordering and Service ...Back Page
WARNING:
To reduce the risk of
injury, the user must read and understand
the operator's manual before using this
product.
SAVE THIS MANUAL FOR
FUTURE REFERENCE
TABLE DES MATIÈRES
Symboles .........................................5-6
Entretien ......................................13-14
Commande de pièces et
réparation ......................... Páge arrière
AVERTISSEMENT :
réduire les risques de blessures,
l'utilisateur doit lire et veiller à bien
comprendre le manuel d'utilisation avant
d'employer ce produit.
CONSERVER CE MANUEL
POUR FUTURE RÉFÉRENCE
ÍNDICE DE CONTENIDO
Símbolos .........................................5-6
Armado ............................................8-9
Pedidos de piezas y
servicio .......................... Pág. posterior
Pour
riesgo de lesiones, el usuario debe leer
antes de usar este producto.
GUARDE ESTE MANUAL
PARA FUTURAS CONSULTAS
Need help?
Do you have a question about the RY141612VN and is the answer not in the manual?
Questions and answers
pressure washer started as usually, ran 10 minutes, stopped to move work station, machine would try to start 3-5 seconds then nothing. waited 1-2 mins. machine tried to start. did this 3 time an quit.
A Ryobi RY141612VN pressure washer could stop running after 10 minutes and fail to restart due to overheating, a tripped thermal overload, or loss of power. Ensure the power cord is connected to a 120V AC, 60 Hz outlet. Let the unit cool and check for any tripped breakers or blown fuses. If the issue continues, service may be needed.
This answer is automatically generated