■ To reduce the risk of injury, keep children IMPORTANT! and visitors away. All visitors should wear It is essential that you read the instructions safety glasses and be kept at a safe in this manual before assembling, operating, distance from the work area. and maintaining the product.
observe the regulations of your local water ■ Do not allow children or untrained individuals utility company when connecting the product to use the product. to a water supply line. ■ Before starting any cleaning operation, close doors and windows. Clear the area to ELECTRICAL SAFETY WARNINGS be cleaned of debris, toys, outdoor furniture, ■...
■ Regularly inspect and maintain the high pressure cleaner for safe operation. RYOBI TRANSPORTATION AND STORAGE recommends inspecting the product every 6 months. CAUTION! Mind the weight of the product when selecting the storage location and during ■...
32. Rotary brush the product, power supply, or 33. Garden hose any electric appliances. 34. RYOBI detergent 35. Garden hose connector NOTE: If using a detergent, refer to the Material Maximum pressure Safety Data Sheet of the detergent.
Do not dispose of waste electrical and electronic equipment as unsorted municipal waste. Waste electrical and electronic equipment must be collected separately. Waste light sources have to be removed from the equipment. Check with your local authority or retailer for recycling advice and collection point.
TROUBLESHOOTING Problem Possible causes Solution Fluctuating pressure Pump sucking air Check that hoses and connections are air tight. Dirty, worn-out, or stuck Bring the product to an valves authorised service centre for service or repair. Worn-out pump seals Bring the product to an authorised service centre for service or repair.
Rated pressure 10 MPa (100 bar) NOTE: Check the specification of the accessory part if it Degree of protection IPX5 matches the specifications of the RYOBI high pressure Rated flow 6 L/min cleaner. Maximum flow 7 L/min WARNING! The declared vibration total values Maximum inlet water 1.2 MPa (12 bar)
Page 24
BS EN IEC 63000:2018, BS EN 62233:2008 For servicing, the product must be sent or presented to a RYOBI authorised service station listed for each country in the following list of service station Measured sound power level: 87.5 dB(A) addresses.