PC SETUP
When using the remote control, aim it at the remote control sensor on the Monitor set.
When connecting with a D-sub 15 pin cable
1
Connect the signal cable from the monitor output
socket of the PERSONAL COMPUTER to the RGB
IN(PC) input socket of the Monitor set.
2
Connect the audio cable from the PC to the
AUDIO IN (RGB/DVI) sockets of the Monitor set.
3
Press the INPUT button to select RGB.
4
Switch on the PC, and the PC screen appears on
the Monitor set.
The set can be operated as a PC monitor.
!
NOTE
►Connect the signal input cable and tighten it by turning
the screws clockwise.
2
1
27