Monitor Out Setup; Pc Setup - LG 50PM3MV Owner's Manual

U514Aen 97/10/26 3:11 AM
External Equipment Connections
Monitor Out
Monitor Out
AUDIO
COMPONENT INPUT 2
COMPONENT INPUT 1
R L
VARIABLE
VIDEO
AUDIO
AUDIO OUT
PC Setup
PC Setup
NOTE: All cables shown are not included with the
How to connect
1. To get the best picture quality, adjust the PC
graphics card to 640x 480, 60Hz.
2. Use the set's RGB INPUT or HDMI/DVI (VIDEO)
INPUT port for video connections, depending on
your PC connector.
• If the graphic card on the PC does not output
analog and digital RGB simultaneously, connect
only one of either RGB INPUT or HDMI/DVI
(VIDEO) to display the PC on the set.
• If the graphic card on the PC does output analog
and digital RGB simultaneously, set the set to
either RGB or HDMI/DVI (VIDEO); (the other
mode is set to Plug and Play automatically by the
set.)
3. Then, make the corresponding audio connection. If
using a sound card, adjust the PC sound as
required.
How to use
1. Turn on the PC and the set.
2. Turn on the display by pressing the POWER button on the set's remote control.
3. Use INPUT or MULTIMEDIA on the remote control to select RGB or HDMI source.
4. Check the image on your set. There may be noise associated with the resolution, vertical pattern, contrast or brightness in PC
mode. If noise is present, change the PC mode to another resolution, change the refresh rate to another rate or adjust the
brightness and contrast on the menu until the picture is clear. If the refresh rate of the PC graphic card can not be changed,
change the PC graphic card or consult the manufacturer of the PC graphic card.
Note:
-Check the image on your TV. There may be noise associated with the resolution, vertical pattern, contrast or
brightness in PC mode. If noise is present, change the PC output to another resolution, change the refresh rate to
another rate or adjust the brightness and contrast on the VIDEO menu until the picture is clear. If the refresh rate
of the PC graphic card can not be changed, change the PC graphic card or consult the manufacturer of the PC
graphic card.
-When you use too long RGB-PC cable, there might be a noise on the screen. We recommend using under 5m of
the cable. It provides the best picture quality.
14 Plasma Monitor
Page 14
Setup
Setup
The set has a special signal output capability which allows you to
hook up a second set.
Connect the second set to the set's MONITOR OUTPUT. See the
Operating Manual of the second set for further details regarding that
device's input settings.
MONITOR OUT
A/V INPUT
NOTE
R L
MONO
AUDIO
VIDEO S-VIDEO
• Component, RGB, HDMI input sources cannot be used for Monitor
S-VIDEO
IN
(R) AUDIO (L) VIDEO
Monitor
out.
AUDIO
REMOTE
CONTROL RGB OUTPUT
RS-232C INPUT
HDMI/ VARIABLE
(CONTROL/SERVICE) DVI(VIDEO) AUDIO INPUT RGB INPUT AUDIO OUT