Pc Setup - LG M2062DP Owner's Manual

EXTERNAL EQUIPMENT SETUP

PC SETUP

When using the remote control, aim it at the remote control sensor on the SET.
When connecting with a D-sub 15 pin cable
1
Connect the signal cable from the monitor output socket
of the PERSONAL COMPUTER to the PC input socket
of the SET.
2
Connect the audio cable from the PC to the AUDIO IN
(RGB/DVI) sockets of the SET.
3
Press the INPUT button to select RGB.
4
Switch on the PC, and the PC screen appears on the set.
The set can be operated as a PC monitor.
!
NOTE
30
►Connect the signal input cable and tighten it up by turning in
the direction of the arrow as shown in the figure.
1 2