Input List - LG M2380D Owner's Manual

INPUT LIST

HDMI, AV, Component and RGB can be recognized by a detect pin and thus enabled only when an
external device approves voltage.
By using TV/RAD button, you can move from External Input to RF Input and to the last watched
programme in DTV/RADIO/TV mode.
• Antenna: Select it when watching the DTV/TV.
• AV: Select it when watching the VCR or external equipment.
• Component: Select it when using the DVD or the Digital set-top box depends on connector.
• RGB : Select it when using PC depends on connector.
• HDMI 1, HDMI 2: Select it when using DVD, PC or Digital set-top box depend on connector.
1
INPUT
!
NOTE
► The OSD (On Screen Display) is displayed on the screen as shown below.
Is the input connected to your PC?
Yes
Do not show message again.
• If you select "Yes" the size and image quality are optimised for your PC.
• If you select "No" the size and image quality are optimised for the AV device (DVD player, Set-top
box, gaming device).
• If you select "Do not show message again," this message does not appear until the monitor is reset.
You can change the set value in MENU s OPTION sInput Label.
• The values set for HDMI1/HDMI2 are saved independently.
Antenna
HDMI 2
Select the input source.
• When turning the product on in HDMI input.
• When switching to HDMI input.
• When connecting an HDMI cable with no signal.
No
AV Component
HDMI 1 RGB
49