Pc Setup; When Connecting With A D-Sub 15 Pin Cable - LG M227WAP Owner's Manual

PC SETUP

When using the remote control, aim it at the remote control sensor on the SET.

When connecting with a D-sub 15 pin cable

1
Connect the signal cable from the monitor output socket
of the PERSONAL COMPUTER to the PC input socket
of the set.
2
Connect the audio cable from the PC to the AUDIO IN
(RGB) sockets of the set.
3
Press the INPUT button to select RGB PC.
4
Switch on the PC, and the PC screen appears on the set.
The set can be operated as a PC monitor.
! !
NOTE
? ?
► User must use shielded signal interface cables (D-sub 15 pin cable) with ferrite cores to maintain standard
compliance for the product.
►Connect the signal input cable and tighten the screws by turn-
ing them clockwise.
AV IN
AUDIO IN
VIDEO (MONO)
HDMI IN (RGB)
PR L
PB
Y
VIDEO
RGB IN (PC)
COMPONENT IN
AUDIO
RGB OUTPUT
AUDIO
R
L
ANTENNA/
R
CABLE IN
AUDIO
31